Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Tyler?
Fireplace services in Tyler typically run $95 to $250 for a sweep and inspection, $180 to $450 for a cap or damper replacement, and $650 to $3,400 for liner repair or replacement depending on the system. The written estimate sets the final price, and you’ll get it before any work begins. Our technicians have up to 11 years of experience, and the same team that inspects your fireplace is the team that repairs it.
That last point matters. On a lot of jobs the cost question splits in two: what the inspection finds, and what fixing it actually takes. When the sweep, the inspection, and the repair all come from one company, you don’t pay for a second visit to have the same problem re-diagnosed. You call (866) 389-3453. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
Most homeowners in Tyler spend in the ranges below once a technician has assessed the fireplace and chimney. These are typical estimates for this market, not a fixed price list. A written estimate, which is free, is what actually sets your cost.
| Service | Typical Cost Range | How Often |
|---|---|---|
| Annual sweep and basic inspection | $95 – $250 | Once a year |
| Chimney inspection (level 2 with camera) | $150 – $325 | Before a repair, after a chimney fire, or on a new property |
| Chimney cap installation (Famco or Copperfield) | $180 – $400 | When a cap is missing, cracked, or loose |
| Damper repair or replacement | $225 – $450 | When the damper won’t seal or open smoothly |
| HeatShield liner resurfacing | $650 – $1,400 | When the liner is cracked but still structurally sound |
| DuraFlex flexible liner replacement | $1,200 – $3,400 | When the liner has failed or you’re upgrading the appliance |
| Flashing repair or re-seal | $200 – $500 | When water is getting in around the chimney at the roofline |
What pushes a job toward the higher end? The condition of the liner, how hard it is to access the flue, and whether the problem is cosmetic or structural. A basic sweep with a clean flue sits near the bottom of the range. A liner replacement on a taller chimney with a tight flue lands at the top. The type of fireplace matters too: a factory-built insert and a masonry fireplace get swept differently, and that changes the labor. We won’t quote you a number over the phone and pretend it’s final. We come out, look at the actual system, and write it down.
What Affects Fireplace Services Pricing in Tyler
Several things move the number. These are the ones that come up most in Tyler homes.
- Frequency of use. A fireplace you burn in every winter morning and evening builds creosote faster than one used a handful of times a year. Heavier buildup takes longer to remove, and that’s labor time. Some homes need a sweep each session; others can stretch further. A technician will tell you which category your fireplace is in.
- Whether the problem is cosmetic or structural. A loose cap is a hardware fix. A cracked tile liner that’s started to affect surrounding masonry is a resurfacing or relining job. The gap between those two is the biggest single variable in fireplace pricing in Tyler.
- Liner condition and material. Masonry chimneys, clay tile liners, and metal liners are priced differently to repair. A clay liner that’s cracked through but still holds its shape may be a candidate for HeatShield resurfacing, which costs less than a full reline. A metal liner that’s failed gets a DuraFlex replacement. Both are professional-trade materials, and both are on our shelves because most contractors don’t carry them.
- Chimney height and access. Taller chimneys and roofs with steeper pitches take more time and more safety setup. Access matters: a chimney on an exterior wall is easier to reach than one boxed in by a roof valley.
- Draft and ventilation problems. Tyler sits in East Texas, where humid air is common. An undersized flue or a fireplace that won’t draw properly can turn a routine service visit into a diagnostic job. That means a camera inspection and possibly venting adjustments rather than just a sweep.
- Parts and components. The cap, damper, and vent components that get replaced aren’t interchangeable hardware-store parts. We use Famco and Copperfield, which are purpose-built for chimney systems. The price reflects the component, not a markup mystery.
How to Save on Fireplace Services
The honest way to keep fireplace costs down in Tyler is not to skip the annual sweep. It’s to catch small problems before they become liner replacements.
A $95 sweep that turns up a loose cap and a tired damper is a cheap visit. Let the same cap stay off through a couple of seasons of East Texas rain, and water gets into the flue; water in the flue speeds up deterioration. Now you’re looking at liner work. The math is clear: routine service costs a fraction of repair.
A few practical things you can do:
- Book the annual sweep and inspection before the heating season, when scheduling is easier and you aren’t waiting on a problem.
- Ask for the inspection findings in plain terms. We’ll tell you what we found and what it means, with photos where it helps. If your liner is borderline and HeatShield resurfacing will buy you years, we’ll say so instead of jumping to a full reline.
- Don’t burn unseasoned wood. It produces more creosote and more frequent sweeps.
- Ask for a written estimate before any repair. Ours is free, and it’s the document that sets the price. Call (866) 389-3453 and we’ll put it in writing.
- Keep the cap on. A missing or cracked cap lets in rain, animals, and debris, and all three create repair bills.
The broad lesson here is that the cheapest way to own a fireplace is to know its condition. Our chimney sweep service exists exactly for that reason: a clean chimney is a measurable thing, and the inspection that comes with it is where you get the information.
Can You Fix a Fireplace Problem the Same Day It’s Found?
Often, yes. When a sweep or inspection turns up a problem like a damaged cap, a sticking damper, or a cracked crown, our technicians can frequently fix it on the same visit because the inspection and repair come from the same team. Liner work that needs HeatShield or DuraFlex is usually scheduled as its own job. Same-day service depends on the part and how the day is running. Call (866) 389-3453 to set up an appointment. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
This is where a single-company setup pays off. When the person who finds the problem is the person who fixes it, there’s no handoff gap, no second company guessing at what the first one saw, and no repeat visit charge. Found during inspection, fixed on the same call, where the part allows.
Is It Cheaper to Repair or Replace a Fireplace Liner?
Repair is cheaper when the liner is still structurally sound. HeatShield resurfacing typically runs $650 to $1,400, while a full DuraFlex liner replacement typically runs $1,200 to $3,400. The decision comes down to a physical inspection: if the clay liner has cracks but still holds its shape, resurfacing can rebuild the flue surface and buy years of service. If the liner has collapsed, shifted, or the appliance is being upgraded, replacement is the right call.
We don’t decide that from the driveway. A camera inspection gives us a real look at the inside of the flue, and we explain what we see before quoting either path. HeatShield is a specialized chimney resurfacing system, and not every chimney company offers it. It’s an alternative to relining that most single-trade cleaners don’t have. That’s a big reason it’s in our lineup.
What Does a Chimney Inspection Include, and Why Does It Cost What It Does?
A Level 2 chimney inspection typically costs $150 to $325 in Tyler and includes a camera look inside the flue, an assessment of the liner, crown, cap, and flashing, and a report of what we found. If you handed us the keys to a new home, this is the visit you want before you light the first fire.
Why the range? A straightforward inspection on an accessible chimney sits at the low end. Taller chimneys, tight flue offsets, and fireplace inserts that need removal to see the flue take longer. The value isn’t the camera pass; it’s the interpretation. Our technicians have up to 11 years of experience, and they fix chimneys as well as inspect them. That hands-on repair work means they understand how and why chimney components fail, which is exactly the kind of thing a looking-only inspection can miss. If you want a next step for the Tyler area, that’s where we’d start.
Do I Need a Sweep and an Inspection, or Just One?
For most Tyler homeowners, both happen in one visit, and a combined sweep and basic inspection typically costs $95 to $250. The sweep removes creosote and debris. The inspection evaluates condition. You want both because a clean flue with a cracked liner still needs repair, and a worn-down but clean fireplace doesn’t need a full sweep every time.
Think of it this way: the sweep tells you what’s in the chimney, and the inspection tells you what shape it’s in. Together they answer the question you actually care about, which is whether it’s safe to burn. We’ll tell you what we found and what it means, in plain language, with no vague warnings.
What Should a Fireplace Estimate Include?
A proper written estimate should list the specific service, the parts being used by brand, and the labor, all in one document. Ours does. If a repair calls for a cap, you’ll see the Famco or Copperfield component. If the liner needs work, you’ll see whether we’re recommending HeatShield resurfacing or DuraFlex replacement, and why.
The estimate is free, and it sets the final price. That’s the whole point: no phone guess that changes on arrival. If a technician finds something new once the job is open, we stop and talk it through before doing more work. You get to make the call. Call (866) 389-3453. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Tyler?
A chimney sweep in Tyler typically costs $95 to $250 when it’s bundled with a basic inspection, which is how most visits run. The number lands at the top of that range when there’s heavy creosote or the flue is hard to access. Call (866) 389-3453 for an exact quote. Estimates are free.
How much does fireplace repair cost in Tyler, TX?
Fireplace repair in Tyler typically runs $180 to $450 for hardware like caps and dampers, and $650 to $3,400 for liner work depending on whether it’s HeatShield resurfacing or a full DuraFlex replacement. The written estimate sets the final price. Call (866) 389-3453 and we’ll come out and write it up.
Is it worth fixing a cracked chimney liner?
Yes, a cracked liner should be repaired before you burn again, and HeatShield resurfacing typically costs $650 to $1,400 versus $1,200 to $3,400 for full replacement. Whether you can go the resurfacing route depends on the structure of the liner, which we confirm with a camera inspection. A cracked liner moves heat and byproducts into places they shouldn’t go, so it’s a job for a trained professional, not a weekend project. Call (866) 389-3453 for an assessment.
Do you charge for a fireplace estimate?
No, the estimate is free. We inspect, then put the findings and the price in a written estimate, and that document sets the final cost. There’s no service-call fee or diagnostic charge to find out what’s wrong. Call (866) 389-3453 to set it up.
Can you come out today?
Same-day service is often possible, depending on the part and the day’s schedule. Call (866) 389-3453 to ask. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How often should I have my fireplace serviced in Tyler?
Once a year for most households, and more often if you burn heavily through the winter. An annual sweep and inspection typically costs $95 to $250, and it’s the cheapest way to stay ahead of liner and cap repairs. Call (866) 389-3453 to get on the schedule.
What brands do you use for fireplace repairs?
We work with professional-trade chimney brands: DuraFlex for flexible liner systems, HeatShield for liner resurfacing, and Famco and Copperfield for caps, dampers, and venting components. Gelco and Olympia Chimney are part of the same roster. These are purpose-engineered parts, not off-the-shelf substitutes. If you want to know which one fits your chimney, call (866) 389-3453.
Getting the Right Price for Your Fireplace
Fireplace work in Tyler is priced by what your specific chimney needs, and the only honest way to get a number is to have someone look at it. The ranges on this page give you a realistic picture of where your cost will land. The written estimate gives you the actual price, for free, before any work starts. Where a repair needs a cap, a damper, or a liner component, we use professional-trade brands like Famco, Copperfield, DuraFlex, and HeatShield, so the materials are right for the job rather than whatever was on hand.
If your fireplace hasn’t been looked at this year, or if something about it has changed, call (866) 389-3453. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll tell you what we found and what it means, and we’ll put the price in writing before any work begins.
Pricing reflects the Tyler market as of 2026. Chimney Sweep Tyler offers free estimates – call (866) 389-3453.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Christine Lin"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Todd Reed"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Ryan Ziegler