Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Tyler?
Chimney cleaning in Tyler typically costs $150 to $275 for a standard sweep of a wood-burning fireplace, with most Tyler homes landing near $195. Add a Level 2 camera inspection and you’re usually looking at $250 to $425 total. A basic Level 1 visual check on its own runs $75 to $140.
Those numbers assume an accessible flue, a single flue, and no surprises. A creosote-glazed flue or a chimney with a damaged crown pushes the job higher, and we’ll tell you exactly why before any work starts. The written estimate is what sets your final price. Call (866) 389-3453 for a free estimate.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s what the work actually breaks down to in the Tyler market this year. These are typical ranges for residential chimney and fireplace systems, not quotes.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard sweep (single flue) | $150 – $275 | Brushing and vacuuming the flue, firebox, smoke shelf, and damper area; removing soot and loose creosote |
| Level 1 visual inspection | $75 – $140 | Readily accessible portions checked by eye and basic tools |
| Level 2 camera inspection | $115 – $260 | Video scan of the full flue interior, added to a sweep or done on its own |
| Sweep plus Level 2 inspection | $250 – $425 | The full annual service most insurers and chimney professionals recommend |
| Second flue sweep | $85 – $160 | Additional flue on the same chimney, when a home has two fireplaces sharing a stack |
| Heavy creosote removal (glazed, Stage 3) | $300 – $600 | Hard, tar-like deposits that need chemical treatment and repeated passes |
| Chimney cap replacement (Famco or Copperfield) | $175 – $425 | Purpose-built stainless or galvanized cap, fitted and sealed |
| HeatShield liner resurfacing | $1,200 – $2,800 | Cast-in-place resurfacing of a cracked clay liner, sized to the flue |
| DuraFlex liner installation | $2,200 – $4,800 | Full flexible stainless liner for liner replacement or an appliance upgrade |
The swing between a $150 sweep and a $275 sweep usually comes down to how much creosote is in the flue, how easy the roof access is, and whether the chimney has a cap that’s been doing its job. A capped chimney that’s swept yearly stays in the lower half of that range. An uncapped chimney on a Tyler lot surrounded by pine and oak fills with debris, and that moves it up.
The repair line items matter because a sweep is where problems surface. HeatShield and DuraFlex are here because those are the systems we work with when a liner is failing. We’d rather tell you the clay liner has spalling at $1,200 to $2,800 of resurfacing than wait for a full reline at three times the number. That decision only gets made after the camera inspection, never on a hunch.
What Affects Chimney Cleaning & Sweep Pricing in Tyler
- Creosote stage. Stage 1 is light soot and brushes out easily. Stage 2 is flaky and dense. Stage 3 is glazed, tar-like, and needs chemical treatment plus multiple passes, which is where the price climbs from typical to $300 to $600.
- Flue count and layout. A single-flue fireplace is the base price. Two flues, or a flue that’s offset rather than straight, adds $85 to $160 for the extra run and time.
- Roof access and chimney height. A one-story ranch in Tyler with a low roofline is quicker to work than a tall two-story chimney that needs more ladder work. That’s labor time, and it’s priced as labor time.
- Debris and animal nests. East Texas pine straw, oak leaves, and the occasional bird or squirrel nest block flues. Clearing a blockage is a separate line from a standard sweep and adds to the ticket.
- Inspection level. A Level 1 check is a look. A Level 2 camera inspection is a full video record of the liner interior, and it’s what tells you whether the clay has cracked. On a home that hasn’t been swept in several years, the camera is worth the extra cost.
- Repairs found during the sweep. A missing cap, cracked crown, or rusted damper gets quoted on the same visit. Famco and Gelco supply the caps and venting components so the fix uses purpose-engineered parts rather than a hardware-store substitute.
One thing that doesn’t move the price in Tyler: our mild winters. We don’t get the hard freezes that crack masonry up north. What we do get is a long burn season that runs into spring some years, and heavy tree canopy that keeps loading debris onto uncapped chimneys. That’s the local factor that drives callbacks here.
How to Save on Chimney Cleaning & Sweep
The single biggest saver is a chimney cap. A cap keeps rain, pine needles, and animals out of the flue, and a chimney that stays clear is cheaper to sweep every year. Installing one from Famco or Copperfield runs $175 to $425 and protects the flue between visits.
Second: sweep on a yearly rhythm instead of waiting for a problem. A flue cleaned every season stays in Stage 1 or light Stage 2 creosote, which is the $150 to $275 job. Let it go three or four years and you’re into treatment territory. Annual service is also what a Level 2 inspection catches in time, before a $400 sweep turns into a $3,000 liner replacement.
Third: burn dry, seasoned wood. Wet wood produces more creosote, and more creosote means more passes with the brush. That’s a free habit that keeps your sweep at the low end.
Fourth: bundle the sweep and the inspection into one visit. A combined sweep plus Level 2 inspection at $250 to $425 costs less than booking them separately, and it gives you a written record of the liner’s condition. If you ever sell the house, that record is worth something.
Estimates are free, and we’ll tell you what we found and what it means in plain language before you commit to anything. Call (866) 389-3453 for a free estimate and fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7.
What Does a Chimney Sweep Actually Do in Tyler?
A sweep removes the soot and creosote that build up on the flue walls, then checks the firebox, smoke shelf, damper, and cap. It’s a measurable job: we can see the before and after of the flue interior, and a clean chimney is a measurable thing. Our technicians have up to 11 years of experience with residential chimney systems, and the inspection work is informed by hands-on repair experience. The technician who sweeps is the technician who understands how these systems fail.
Because we handle chimney sweep, inspection, and repair as one service, a problem found during the sweep gets diagnosed and fixed without you calling a second company. That continuity matters. A sweep-only outfit finds a cracked crown and hands you a phone number. We find it, explain it, and quote the fix with the right material on hand.
Why the Creosote Stage Changes the Price
Creosote is the reason chimney cleaning isn’t a flat fee. Stage 1 is a dusting that comes off with a standard brush. Stage 2 is a flaky crust that takes more passes. Stage 3 is a hard, glazed, tar-like coating that has to be softened with a chemical treatment and worked in stages. Stage 3 is also the fire risk, and it’s why we won’t just brush over it and call it done.
If your flue has been burning green wood or hasn’t been swept in years, expect the higher range. A camera inspection at the start tells us which stage we’re dealing with before we quote, so there’s no surprise on the invoice. That’s the plain-language diagnostics we aim for: we’ll tell you what we found and what it means.
Do You Need a Level 2 Inspection With Your Sweep?
Most years, a Level 1 check alongside the sweep is enough. A Level 2 camera inspection is worth adding when the chimney is new to you, when you’ve changed appliances, after a chimney fire, or when it’s been several years since the last sweep. The camera runs the full length of the flue and shows cracks, gaps, and spalling that a visual check can’t reach.
In Tyler, where a lot of homes have older masonry chimneys, that camera is how we catch a failing clay liner early enough for HeatShield resurfacing at $1,200 to $2,800 instead of a full DuraFlex reline at $2,200 to $4,800. Inspecting informed by repair experience is the whole point.
Frequently Asked Questions About Chimney Sweep Cost
How much does a chimney sweep cost in Tyler?
A standard chimney sweep in Tyler typically runs $150 to $275, with most homes near $195. A sweep bundled with a Level 2 camera inspection lands around $250 to $425. Call (866) 389-3453 for an exact quote, and the estimate is free.
How often should a chimney be cleaned?
Once a year for a home that burns regularly, and at least every other year for light use. Annual service keeps creosote in the cheap-to-clean range and catches liner problems early. If it’s been more than a couple of years, book a sweep with a camera inspection so you know the liner’s real condition.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the liner is cracked but structurally sound: HeatShield resurfacing at $1,200 to $2,800 beats a full DuraFlex reline at $2,200 to $4,800. Replacement wins when the liner is collapsed, badly spalled, or the wrong size for the appliance. The camera inspection decides which path you’re on, and we’ll say so plainly. Call (866) 389-3453 to get that answer for your chimney.
Why does my sweep cost more than my neighbor’s?
Creosote stage, flue count, roof access, and whether the chimney is capped are the usual reasons. A capped single flue at Stage 1 is the base price. A two-flue uncapped chimney with glazed creosote lands at the top of the range. The written estimate itemizes exactly what’s driving the number.
Can you come today?
Often, yes. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours gets booked into the next opening. Call (866) 389-3453 and we’ll find you the earliest slot for your Tyler home.
Why Proper Materials Keep the Price Honest
A sweep that turns into a repair is where material quality shows up on the invoice. We work with a curated set of professional-trade chimney brands: DuraFlex flexible liners, HeatShield resurfacing, Gelco and Famco caps and venting, Olympia Chimney components, and Copperfield stainless parts. These are purpose-built chimney components, not off-the-shelf substitutes, and using them means a repair that lasts rather than one you pay for twice.
The brands matter to the price because a generic cap that rusts out in a couple of seasons costs more over time than a proper Famco or Copperfield cap fitted once. Same with the liner: a HeatShield resurfacing sized correctly to the flue is a fraction of a full reline, and it’s a repair most single-trade cleaners can’t offer. That’s why we stock the professional-trade names and specify them by system rather than reaching for whatever’s on the shelf.
Our technicians have up to 11 years of experience, and because we cover inspection, cleaning, and repair, nothing falls between companies. A problem found during inspection gets fixed on the same call, with the right material. If a repair is more than your chimney needs, we’ll tell you that too.
Book Your Tyler Chimney Sweep
Chimney cleaning in Tyler is a $150 to $275 job most years, more if there’s heavy creosote or a repair to handle. The written estimate sets your final price, and there’s no charge for it. We’ll sweep, inspect, and if something needs fixing, we’ll quote it with a purpose-built part and explain why it’s the right choice.
Call (866) 389-3453 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Tyler market as of 2026. Chimney Sweep Tyler offers free estimates – call (866) 389-3453.
Written by the team at Chimney Sweep Tyler.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Christine Lin"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Todd Reed"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Ryan Ziegler