Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Tyler?
A chimney cap in Tyler typically runs $150-$475 installed, depending on the cap and the flue setup, and a crown rebuild usually lands between $350-$1,200. A full crown repair that involves recasting the top and sealing it can push toward $1,500 on larger or badly deteriorated masonry chimneys. Most single-flue homes fall in the middle of those ranges, and the written estimate you get on site sets the final price.
We offer free estimates, and our technicians have up to 11 years of experience with cap and crown work on Tyler homes. If you’ve spotted rust streaks down the chase, a loose cap, or a crack running along the top of the chimney, call (866) 389-3453. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Caps installed run about $150-$475; crowns rebuilt run about $350-$1,200.
- Stainless caps cost more than galvanized but last far longer against East Texas rain.
- A crown over a single flue is cheaper than a full-width crown spanning a large masonry stack.
- Cracks, spalling brick, and a bad cap often turn up during an inspection, which is why we handle sweep, inspection, and repair together.
- Estimate is free and per job. No surprises after the work starts.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down by line item for the Tyler market. These are typical installed ranges, not a quote. Prices move with cap size, material, and how much masonry the crown job turns into.
| Line Item | Typical Range (Installed) |
|---|---|
| Single-flue stainless cap (top-mount, standard) | $150-$360 |
| Multi-flue stainless cap | $280-$475 |
| Galvanized cap (lower cost, shorter life) | $120-$260 |
| Custom or oversized cap for a large stack | $400-$700 |
| Crown repair (patch and reseal existing crown) | $350-$650 |
| Crown rebuild (recast over the flue) | $550-$1,200 |
| Full-width masonry crown on a large chimney | $900-$1,500 |
| Crown wash / seal coat on a sound crown | $250-$450 |
What pushes a job toward the top of those ranges: a crown that has cracked through to the brick beneath it, spalling along the top course, more than one flue to cover, or a cap that has to be custom-built because the stack is an odd size. A simple galvanized cap swap on a single flue sits near the bottom.
The crown is the part of the system most homeowners never think about until water shows up, and it’s the piece that keeps the whole top of the chimney dry. When a crown cracks, water gets into the masonry and starts working its way down. That’s the failure pattern we see most in Tyler, and the reason we treat crown repair as a masonry job, not a cosmetic one.
We work with professional-trade brands rather than off-the-shelf substitutes. Caps, dampers, and venting components come from Famco and Copperfield, and liner components come from DuraFlex, Olympia Chimney, and Gelco. That matters on a cap because a purpose-engineered cap is built for chimney dimensions and wind loads, not adapted from something made for a different use.
What Affects Chimney Cap & Crown Pricing in Tyler
Five things move the price most on a cap or crown job in Tyler. Knowing them before the estimate helps you read the number on the page.
- Number of flues. A chimney with one flue takes one cap. A fireplace plus a furnace flue plus a water heater vent means a multi-flue cap, fabricated to fit, and that adds to both material and labor.
- Cap material. Stainless steel costs more up front than galvanized, but it holds up far longer against East Texas humidity and heavy spring rain. Galvanized is the budget choice and we’ll say so.
- Crown condition. A hairline crack gets a patch and a seal. A crown cracked through and loose over the brick gets removed and recast. The difference is hours of masonry work, not minutes.
- Chimney size and height. A tall or wide masonry chimney means more material for a full crown, more scaffolding, and more time on the ladder. Access drives cost on the crown more than anything else.
- Masonry damage underneath. If the crown failed and water got into the brick, brick replacement or a repair to the top course gets added. That’s the line item that can turn a crown repair into a bigger masonry job, and we’ll explain why and show you what we found.
- Whether it’s found during a sweep or inspection. When we sweep and inspect a chimney, we see the crown and cap as part of the same visit. If a problem is found, we can fix it rather than send you to a second company. That continuity usually keeps the total lower than piecing the work out.
One part of the Tyler picture worth knowing: this is East Texas, so the chimney’s main enemy is water, not snow. Long, wet springs and humid summers work on mortar and masonry more than a single deep winter does. A sound crown and a properly fitted cap are the two cheapest defenses against that, and they’re the parts we flag most often on chimney sweep and inspection calls around Tyler.
How to Save on Chimney Cap & Crown
A few practical moves keep the cost closer to the low end of the range.
- Repair the crown before it fails. A $350-$650 patch-and-seal on a hairline crack is far cheaper than a $550-$1,200 rebuild plus masonry repair once water has gotten in. Catch it early and the crown stays a small line item.
- Fix the cap and crown together. If the cap needs replacing and the crown needs attention, doing both on one visit saves a second trip and lets us fit the cap to the freshly rebuilt crown correctly.
- Choose stainless once. A stainless cap costs more on the invoice and less over its life than replacing galvanized every few years against Tyler’s rain and humidity.
- Get the inspection first. An inspection tells you whether the crown is sound, cracked, or gone. You’ll know whether you’re buying a seal coat or a rebuild, and you won’t pay for a rebuild you don’t need. Our inspection work is informed by repair experience, so the technician who finds a problem is the one who understands how it fails.
- Ask for the written estimate before any work. The estimate is free and it’s per job. We put the scope and price in writing so the number on the invoice matches the one you agreed to.
If you want a straight answer on whether you’re looking at a cap, a crown, or both, call (866) 389-3453 for a free estimate. We’ll tell you what we found and what it means, not what scares you into a bigger job.
Chimney Cap vs. Crown: What Are You Actually Paying For?
A cap sits on top and a crown is the concrete or mortar top of the chimney itself. The cap is the metal cover with a mesh screen that keeps rain, animals, and sparks out of the flue. The crown is the sloped layer over the top of the masonry that sheds water away from the brick. They fail for different reasons and they’re priced differently, so it helps to know which one you’re being quoted on.
A cap fails when its mesh rusts through, the top plate lifts in wind, or the whole thing works loose. Those are replacement jobs, and they’re quick. A crown fails when a crack lets water in, or when the mortar over the flue breaks down and the crown separates from the brick. Those are masonry jobs with more labor behind them, which is why the crown ranges run higher.
The cap protects the flue. The crown protects the chimney structure. You want both sound, and on most Tyler homes they get inspected in the same pass.
Size and Style of the Cap
A single-flue stainless cap with a standard screen covers most fireplace chimneys and lands toward the lower part of the range. A multi-flue cap has to span several openings, so it’s a larger fabricated piece and costs more. Custom caps for odd-sized or oversized stacks are built to spec, and that’s where the cap price climbs toward $700. We source these from Famco and Copperfield because a cap built for a chimney fits and lasts better than a generic cover bent to fit.
Why We Handle Cap and Crown Alongside Sweeping and Inspection
Cap and crown problems are usually discovered during routine maintenance, not because a homeowner went looking for them. A sweep pulls soot and creosote out of the flue. An inspection looks at the whole system, top to bottom, including the cap, the crown, the liner, and the firebox. When the technician doing the sweep is also the one doing the inspection and the repair, nothing gets lost in a handoff.
That’s the reason we keep all three core services, chimney sweeping, inspection, and repair, in one place. The sweep reveals the condition. The inspection documents it. The repair fixes it with professional-trade parts. A clean chimney is a measurable thing, and so is a crown that’s sound and shedding water the way it should.
For liner problems found during a crown or cap job, we also install chimney liner systems. Where a full reline isn’t needed, we use the HeatShield system to resurface the liner. That’s an option most single-trade cleaners don’t offer, and it can save the cost of a full reline when the damage is limited.
When to Repair the Crown vs. Rebuild It
The decision usually comes down to whether the crown is cracked on the surface or broken away from the brick. A surface crack that hasn’t reached the masonry underneath can be patched and sealed, and that’s the $350-$650 repair. A crown that’s cracked through, loose, or separating from the top course gets removed and recast, which is the $550-$1,200 rebuild, and on a large chimney with a wide span it can go higher.
There’s also the middle case: a crown that’s sound but worn on the surface gets a wash and seal coat for $250-$450, which buys years before a rebuild is needed. If you’re not sure which one you’re looking at, that’s what the inspection answers.
A cracked crown isn’t a cosmetic problem. Water that gets past it soaks into the brick and mortar and shows up later as spalling, stains on the chase, or damage inside the firebox. Addressing it early keeps the cost down. Here’s how one Tyler-area cap installation typically goes. A technician inspects the top of the chimney from the roofline, measures the flue, and checks the crown for cracks. If the crown is sound, the new cap is fitted, sealed, and secured. If the crown needs work, that’s quoted separately and scheduled. The cap goes on after the crown work, so it fits a sound surface.
Frequently Asked Questions About Chimney Cap & Crown Cost
How much does a chimney cap cost in Tyler, TX?
A chimney cap in Tyler typically costs $150-$475 installed, with most single-flue stainless caps landing in the $150-$360 range. Multi-flue and custom-sized caps run higher. Call (866) 389-3453 for a free estimate.
How much does it cost to repair or rebuild a chimney crown?
Crown repair in Tyler runs about $350-$650, and a full crown rebuild runs about $550-$1,200. A larger masonry chimney with a full-width crown can reach $900-$1,500. The written estimate sets the final price, and it’s free.
Is it cheaper to repair the crown or replace it?
Repair is cheaper when the crack is surface-level: $350-$650 versus $550-$1,200 or more for a rebuild. A crown that’s cracked through or separating from the brick needs replacing because a patch won’t hold. An inspection tells you which you’re facing, and the estimate is free.
Can you fix a chimney cap and crown the same day?
In many cases, yes. A cap replacement is a short job, and a crown repair or rebuild can often be handled on one visit depending on the masonry involved. Call (866) 389-3453 to schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Do I need a crown if I already have a chimney cap?
Yes. The cap covers the flue and the crown protects the top of the masonry, so you need both. A cap alone doesn’t stop water from soaking into a cracked crown. If your cap is fine but the crown is cracked, the crown is the repair that matter most.
Schedule Your Cap or Crown Estimate in Tyler
If you’ve got a cracked crown, a rusted or missing cap, or you’re not sure what’s up there, get it looked at before the next heavy rain does more damage. A cap install runs $150-$475 and a crown repair runs $350-$1,200 on most Tyler chimneys, and the estimate is free. Our technicians have up to 11 years of experience, we work with professional-trade brands, and the technician who finds the problem fixes it.
Call (866) 389-3453 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside dispatch hours, it gets booked into the next opening, Sunday through Friday.
Written by the team at Chimney Sweep Tyler.
Pricing reflects the Tyler market as of 2026. Chimney Sweep Tyler offers free estimates – call (866) 389-3453.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Christine Lin"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Todd Reed"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Ryan Ziegler